基本資料表

許兆民
( 07 )3814526 ext 15317
( 07 )3831373
許兆民

教師

專任師資-設計與製造
教授
國立中山大學 機械與機電工程學系 博士(2010)
微型焊接、有限元素分析、機械設計方法、齒輪振動、光電與半導體封裝、機械與化學材料製程
微焊振動實驗室
學年度論文名稱
111Hong-Mei Dai, Bo-Hao Chen, Chao-Ming Hsu,* and Cheng-Fu Yang,Design and Analysis of New Electric Motorcycle: Analysis of Bending Moment Stiffness, Sensors and Materials,34, pp1733–1746,(SCI)
111Yuchun Yang, Zhi-Hong Lin, Chao-Ming Hsu,* and Cheng-Fu Yang,Effects of Forced Convection on the Deformation Values of 3D-printed Nylon Thin-walled Specimens, Sensors and Materials,34, pp1665–1673,(SCI)
111Yuchun Yang, Zhi-Hong Lin, Chao-Ming Hsu,* and Cheng-Fu Yang,Effect of Temperature Field on Deformation of 3D-Printed Polylactic Acid Objects under Forced Convection, Sensors and Materials,34, pp1675–1684,(SCI)
111Shuai He, Kao-Chi Chen, Chao-Ming Hsu,* and Cheng-Fu Yang,Design of 13 Million Pixel Camera for Cellphone Applications, Sensors and Materials,34, pp1685–1696,(SCI)
111Jun Dai,Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Peng Wang,and Cheng-Fu Yang,Effects of Forced Convection on the Deformation Values of 3D-printed Nylon Thin-walled Specimens, Sensors and Materials,34, pp2577–2589,(SCI)
110Xueyan Li, Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Jie Zhang, and Cheng-Fu Yang,Simulation of Effect of Ar Flow Rate on Silicon Ingot Growth in Directional Solidification System, Sensors and Materials,33, pp2607–2618,(SCI)
110Jun Dai, Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Peng Wang, and Cheng-Fu Yang,Simulation Analysis of Silicon Ingot Growth in Directional Solidification System, Sensors and Materials,33, pp2577–2589,(SCI)
109Ah-Der Lin, Wen-Kai Yu, Sian Zheng Poon, Cheng-Yi Chen, Chao-Ming Hsu, Study on Nitrogen-Doped Graphene Ink and Its Effects on the Heat Dissipation for the LED Lamps,Applied Sciences,10,(SCI)
108Tsung-Pin Hung, Chao-Ming Hsu, Hsiu-An Tsai, Shuo-Ching Chen and Zong-Rong Liu,Temperature Field Numerical Analysis Mode and Verification of Quenching Heat Treatment Using Carbon Steel in Rotating Laser Scanning,Materials,12,(SCI)
108Cheng-Fu Yang, Wei-Lung Pai, Chao-Ming Hsu, Cheng-Yi Chen,Mechanical Properties of Cobalt-based Alloy Coating Applied Using High-velocity Oxygen Gas and Liquid Fuel Spraying Processes,Sensors and Materials,31, pp531-542,(SCI)
108Ah-Der Lin, Sian Zheng Poon, Hong-Wei Tu, Cheng-Yi Chen, Chao-Ming Hsu,Study on Thermoelectric Conversion and Conjugate Heat Transfer for PCBA by Finite Element Analysis,Applied Sciences,10,(SCI)
107Ah-Der Lin, Chi-Liang Kung, Sung-Po Hsu, Chao-Ming Hsu*, Cheng-Yi Chen,Effects of Coating Film Parameters on Thermal and Stress Distributions of Glass-Based Phosphor-Converted Color Wheels,Coatings,8,(SCI)
107Ah-Der Lin, Chi-Liang Kung, You-Qing Cao, Chao-Ming Hsu,Cheng-Yi Chen,Stainless Steel Surface Coating with Nanocrystalline Ag Film by Plasma Electrolysis Technology,Coatings,8,(SCI)
107Cheng-Yi Chen, Rong-Ching Wu, Bing-Jyun Tsai, and Chao-Ming Hsu,Design and Analysis of an Electrical Magnetic Holding Device, Microsystem Technologies,1, pp1-12,(SCI)
107Ah-Der Lin, Chi-Liang Kung, Wei-Chen Hsieh,Chao-Ming Hsu, Cheng-Yi Chen,Study on Cleaning the Surface of Stainless Steel 316 Using Plasma Electrolysis Technology, Applied Sciences,8,(SCI)
107Ah-Der Lin, Chi-Liang Kung, Wei-Chen Hsieh,Chao-Ming Hsu, Cheng-Yi Chen,Study on Cleaning the Surface of Stainless Steel 316 Using Plasma Electrolysis Technology, Applied Sciences,8,(SCI)
107Chi-Liang Kung, Ah-Der Lin, Po-Wei Huang,Chao-Ming Hsu,Estimation formula for residual stress from the blind-hole drilling method,Advances in Mechanical Engineering,10, pp1-11,(SCI)
107Chien-Hao Kao, Chia-Chun Chen, Wei-Yi Jhu, Yu-Tza Tsai, Shinn-Horng Chen, Chao-Ming Hsu,Cheng-Yi Che,Novel digital glove design for virtual reality applications,Microsystem Technologies,24, pp4247-4266,(SCI)
106Chi-Liang Kung, Cheng-Kuang Hung, Chao-Ming Hsu, Cheng-Yi Chen,Residual Stress and Deformation Analysis in Butt Welding on 6 mm SUS304 Steel with Jig Constraints Using Gas Metal Arc Welding,Applied Sciences,7,(SCI)
106Cheng-Yi Chen, Rong-Ching Wu, Chung-Long Pan, Chao-Ming Hsu and Shinn-Horng Chen,Embedded controller design for curtain motor operation with Bluetooth and Modbus communication,ICIC Express Letters Part B: Applications,8, pp1243-1252,(EI)
105Kun-Neng Chen, Chao-Ming Hsu, Jing Liu, Yi-Tang Chiu and Cheng-Fu Yang,Effect of Different Heating Process on the Photoluminescence Properties of Perovskite Eu-Doped BaZrO3 Powder,Applied Sciences,6, pp1-12,(SCI)
105Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin,Determination of piezoelectric parameters from the measured natural frequencies of a piezoelectric circular plate, Integrated Ferroelectrics,168, pp36-52,(SCI)
105Fang-Hsing Wang, Kun-Neng Chen, Chao-Ming Hsu, Min-Chu Liu and Cheng-Fu Yang,Investigation of the Structural, Electrical, and Optical Properties of the Nano-Scale GZO Thin Films on Glass and Flexible Polyimide Substrates,Nanomaterials,6, pp1-13,(SCI)
105Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin,The Coffin-Manson Formula for Unleaded Sn/3.0Ag/0.5Cu Solder,Integrated Ferroelectrics,172, pp200-214,(SCI)
105Kun-Neng Chen, Chao-Ming Hsu, Jing Liu, Yu-Chen Liou and Cheng-Fu Yang,Investigation of Antireflection Nb2O5 Thin Films by the Sputtering Method under Different Deposition Parameters,Micromachines,7, pp1-12,(SCI)
105Wei-Yi Chan, Chao-Ming Hsu,"Extraction of the Engineering Inverse Algorithm for LED Laser Eutectic Die Bonding Process Parameters,Applied System Innovation, pp371-375,(AHCI)
105Hong-Wei Tu , Che-Chia Tsao , Xiao-Qing Lin , Chao-Ming Hsu, Ah-Der Lin, Cheng-Yi Chen,Design and Manufacture of Dual Axis Solar Tracker Structure,ICIC Express Letters Part B:Applications,7, pp1917-1923,(EI)
104Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin,A Study on the Conductivity Variation of Au-Coated Conductive Particles in ACF Packaging Process,Journal of Nanomaterials,2015, pp1-8,(SCI)
104,Investigation of the High Mobility IGZO Thin Films by Using Co-Sputtering Method,8, pp2769-2781,(SCI)
104Te-Ching Hsiao, Wei-Chen Hsieh, Chun-Fu Yang, Cheng-Yi Chen, Chao-Ming Hsu,The Design of the Directional Solidification Block in the Directional Solidification System Furnace,ICIC Express Letters Part B:Applications,06, pp3291-3297,(EI)
103Cheng-Yi Chen, Xiaoqing Lin, Sung-Tsun Shih, Chao-Ming Hsu, Chien-Yuan Liu,Mechanism Design and Analysis for Solar Tracking System with 500W Power Output,Lecture Note in Electrical Engineering,293, pp195-204,(EI)
103Bo-Rong Qiu, Cheng-Han Lin, Ah-Der Lin, Chao-Ming Hsu,The Fatigue Life Analysis of the VCSEL with Sn/Pb and Sn/Ag/Cu Solder,Lecture Notes in Electrical Engineering,293, pp111-120,(EI)
103Xiao-Qing Lin, Jhao-Jhong Su, Chao-Ming Hsu, Ah-Der Lin,Process Parameters Optimization of Micro Plasma Welding for Small-scaled SUS 304 Pipe,Lecture Notes in Electrical Engineering ,293, pp101-110,(EI)
103Da-Yun Huang, Shu-Lan Ke, Chien-Kuei Chang, Chao-Ming Hsu,Expedited Stabilization of Furnace Slag Produced from Basic Oxygen Steelmaking,Lecture Notes in Electrical Engineering,293, pp81-90,(EI)
102S. C SUN, C. Y. HUANG, CHAO MING HSU, AND JAO HAW KUANG1,The Effect of Nano-Scale Local Defects on Mechanical Properties of Silicon and Diamond Films,Journal of Integrated Ferroelectric,143, pp1~9,(SCI,SSCI)
102,Simulation and Analysis on the Blind Hole Method Using the Finite Element Method,Applied Mechanics and Materials,328, pp990~994,(SSCI)
102,The Temperature and Residual Stress Distributions of Butt Weld Pass on Nickel Alloy 690 Plate,Advanced Materials Research,690-693, pp2651~2654,(SSCI)
102,Using Nano Indentation Techniques to Investigate the Young’s Moduli for Human Teeth of Different Ages,Journal of Bionanoscience,7, pp154~158,(SCI,SSCI)
102,Shear Toughness Evaluation of Solder Joints for the Reliability Tests,Applied Mechanics and Materials,311, pp467~471,(SSCI)
102,The Squeeze Film Damping Effect on Dynamic Responses of Micro-electromechanical Resonators,Applied Mechanics and Materials,284-287, pp1961~1965,(SSCI)
102,The Local Defect Effect on Molecular Local Density State in Carbon Diamond Structures,Applied Mechanics and Materials,275-277, pp1810~1813,(SSCI)
102,Residual Stress and Bead Profile Analysis of Pulsed Nd: YAG Laser Lap Welding,Advanced Material Research,284-287, pp915~918,(SSCI)
102Hui-Lung Chien, Chao-Ming Hsu, Ah-Der Lin , Tsung-Pin Hung, Yung-Yu Chen, Jao-Hwa Kuang,The Effect of Plaque and Artery Parameters on Stent Expansion during the Implantation Process,Life Science,10, pp1717~1720,(SCI,SSCI)
102,The Growth of Mouse Osteoblast Cell under Vibration Wave in Vitro,Life Science,10, pp1721~1726,(SCI,SSCI)
102Chao-Ming Hsu, Ah-Der Lin, Jao-Hwa Kuang,The Creep Parameters of SAC305 Unleaded Solders,Advances in Materials Science and Engineering,2013, pp1-10,(SCI)
101,The Squeeze Film Effect on Micro-electromechanical Resonators,Journal of Vibroengineering,14, pp1486~1493,(SCI,SSCI)
101,Stainless Steel Surface Etching Morphologies Using Electro Plasma Technology,Advanced Science Letters,13, pp178~182,(SSCI)
101,An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints,Advanced Material Research,476-478, pp2455~2458,(SSCI)
101,The Surface Absorption Coefficient of S304L Stainless Steel by Nd: YAG Micro-Pulse Laser,Advanced Material Research,472-475, pp2531~2534,(SSCI)
101,Enhancement of coupling efficiency of butterfly package laser modules based on Post-Weld-Shift compensation,Applied Mechanics and Materials,145, pp109~113,(SSCI)
100,The Effect of Residual Stress on Coupling Power Loss of VCSEL Modulus,American Journal of Engineering and Technology Research,11, pp618~621,(SSCI)
99,Dynamic Behavior of Globoidal Cam Systems with Torque Compensation Mechanisms,Mechanism and Machine Theory,45, pp1201~1214,(SCI,SSCI)
94光灼華,許兆民,The Residual Stress and Post-Weld-Shift Distributions in VCSEL Packaging,Engineering Science & Technology Bulletin NSC,81, pp168~171
92,Effect of Temperature Cycling on Angular Alignment on Angular Alignment in Add/Drop Filter Module Packaging,J. of Electronic Materials,32, pp137~141,(SCI,SSCI)
7、 Xueyan Li, Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Jie Zhang, and Cheng-Fu Yang,Simulation of Effect of Ar Flow Rate on Silicon Ingot Growth in Directional Solidification System, Sensors and Materials,33, pp2607–2618,(SCI)
6、 Jun Dai, Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Peng Wang, and Cheng-Fu Yang,Simulation Analysis of Silicon Ingot Growth in Directional Solidification System, Sensors and Materials,33, pp2577–2589,(SCI)
Yuchun Yang, Zhi-Hong Lin, Chao-Ming Hsu,* and Cheng-Fu Yang,Effects of Forced Convection on the Deformation Values of 3D-printed Nylon Thin-walled Specimens, Sensors and Materials,34, pp1665–1673,(SCI)
Yuchun Yang, Zhi-Hong Lin, Chao-Ming Hsu,* and Cheng-Fu Yang,Effect of Temperature Field on Deformation of 3D-Printed Polylactic Acid Objects under Forced Convection, Sensors and Materials,34, pp1675–1684,(SCI)
Shuai He, Kao-Chi Chen, Chao-Ming Hsu,* and Cheng-Fu Yang,Design of 13 Million Pixel Camera for Cellphone Applications, Sensors and Materials,34, pp1685–1696,(SCI)
Hong-Mei Dai, Bo-Hao Chen, Chao-Ming Hsu,* and Cheng-Fu Yang,Design and Analysis of New Electric Motorcycle: Analysis of Bending Moment Stiffness, Sensors and Materials,34, pp1733–1746,(SCI)
Jun Dai,Yao-Chung Yang, Chao-Ming Hsu,* Hsien-Wei Tseng, Peng Wang,and Cheng-Fu Yang,Effects of Forced Convection on the Deformation Values of 3D-printed Nylon Thin-walled Specimens, Sensors and Materials,(SCI)
學年度論文名稱
110Chao-Ming Hsu , Yu-Hsien Shih, Poon Sian Zheng, Liang-An Zheng, Tuz-chun Yen,Finite Element Analysis of Multi-Layer Directed Energy Deposition of Ti-6Al-4V,2021 International Conference on Advanced Smart Materials and Structures(ICASMS 2021),2021-11-2021-11,(其他)
108Yu-Cheng Lee, Min-Chieh Kang, Yan-Cheng Cao, Ah-Der Lin, Ming-Chang Tsai, Chao-Ming Hsu,The Study of Impurities Distribution in Silicon Ingot with Growth Process by Directional Solidification System,2019 IEEE International Conference of Intelligent Applied Systems on Engineering (ICIASE 2019),2019-04-2019-04,(其他)
108Cheng-Zhu Li, Ruei-Han Chen, Jun-Yi Lin, Liang-An Zheng, And Chao-Ming Hsu,A Study on the Effect of Process Parameters on Thin NAND Flash Wafer by Multi - Beam Matrix Laser Cutting,019 International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2019),2019-05-2019-05,(其他)
108Ah-Der Lin, Chih-Chung Cheng, Poon Sian Zheng, Cheng-Yi Chen, Ming-Chang Tsai, Chao-Ming Hsu,Study on Thermoelectric Conversion and Conjugate Heat Transfer for PCBA by Finite Element Analysis,2019 IEEE International Conference on Computation, Communication and Engineering (ICCCE 2019),2019-11-2019-11,(其他)
108Shang-Ping Wei, Kai-Chun Lin, Poon Sian Zheng, Chen-Yuan Lee, Ah-Der Lin, Chao-Ming Hsu,Surface Topography Simulation of Laser Metal Deposition of Ti-6Al-4V,2019 International Conference on Advanced Technology Innovation (ICATI 2019),2019-07-2019-07,(其他)
107Chi-Liang Kung, Te-Ching Hsiao, Chao-Ming Hsu, Cheng-Yi Chen,Optimizing quenching distortion after Carburizing process for Drive Shafts, 2018 International Conference on Applied System Innovation (ICASI 2018),2018-04-2018-04,(其他)
107Wei-Lung Pai, Chao-Ming Hsu, Cheng-Yi Chen, Hao-En Hsiao, Liang-An Zheng, Ah-Der Lin,The Study of Mechanical Properties of Co-base Coating Sprayed by Gas and Liquid-fuelled HVOF,2018 IEEE International Conference on Information, Communication and Engineering (ICICE 2018),2018-09-2018-09,(其他)
107Ah-Der Lin, Hao-En Shih, Chao-Ming Hsu, Yi-Le Lin, Liang-An Zheng and Cheng-Yi Chen,Tempering Effects on Multi-track Laser Surface Heat Treatment,2018 International Conference on Positioning Technology (ICPT 2018),2018-11-2018-11,(其他)
107Bo-How Chen, Yao-Chung Yang, Cheng-Yi Chen, Chao-Ming Hsu,The Simulation Analysis of Silicon Ingot Growth in Directional Solidification System,2018 International Conference on Positioning Technology (ICPT 2018),2018-11-2018-11,(其他)
106Yan-Ru Wang, Yaw-Hong Kang, Cheng-Kuang Hung, Chao-Ming Hsu,Analysis of Jig Application to Inhibit Welding Deformation on SUS304 Steel Plates for Gas Metal Arc Welding (GMAW),2017 International Conference on Applied System Innovation (ICASI 2017),2017-05-2017-05,(其他)
106Kai-Chun Lin, Yu-Yi Lin and Chao-Ming Hsu,Design of Argon Runner in Polycrystalline Silicon Directional Solidification System,2017 International Conference on Innovative Computing, Information and Control (ICICIC2017),2017-08-2017-08,(其他)
106Hong-Wei Tu, Wei-Chen Hsieh, Chao-Ming Hsu,The Study of Electrolytic Plasma Technology to Cleaning Surface SUS316,2017 International Multi-Conference on Engineering and Technology Innovation (IMETI 2017,2017-10-2017-10,(其他)
106Wen-Kai Yu, You-Qing Cao, Chao-Ming Hsu,The Study of Stainless Steel Surface Coating with Nanocrystalline Ag Film by Plasma Electrolysis Technology,Hsu, “The Study of Stainless Steel Surface Coating with Nanocrystalline Ag Film by Plasma Electrolysis Technology,” 2017 International Multi-Conference on Engineering and Technology Innovation (IMETI 2017),2017-10-2017-10,(其他)
106Poon Sian Zheng, Sung-Po Hsu, Chao-Ming Hsu,The Effects of Coding Film Parameters on the Thermal and Stress Distributions of Glass-based Phosphor-converted Color Wheel,2017 IEEE International Conference on Information, Communication and Engineering (ICICE 2017),2017-11-2017-11,(其他)
106Hung-Yu Chang, Hao-En Shih, Chao-Ming Hsu,The Tempering Effect on Multi-track Laser Surface Heat Treatment,2017 IEEE International Conference on Information, Communication and Engineering (ICICE 2017),2017-11-2017-11,(其他)
105Tz-Sheng Shiu, Kai-Chun Lin, Yi-Sheng Liou, and Chao-Ming Hsu,Analysis of plastic lndexable gear with temperature effect,2016 International Conference on Applied System Innovation (ICASI 2016),2016-05-2016-06,(其他)
105Tz-Sheng Shiu, Zhi-hong Lin, Po-Wei Huang, Chao-Ming Hsu,Estimation Formula for Residual Stress from the Blind Hold Drilling Method,2016 International Conference on Applied System Innovation (ICASI 2016),2016-05-2016-06,(其他)
105Hong-Wei Tu, Che-Chia Tsao, Xiao-Qing Lin and Chao-Ming Hsu,Design and Manufacture of Dual Axis Solar Tracker,2016 International Conference on Innovative Computing, Information and Control (ICICIC 2016),2016-08-2016-08,(其他)
105You-Qing Cao, Da-Yun Huang, Jian-Gui Chang, and Chao-Ming Hsu,The Study of the Zinc Flake Produced by Alkaline Electrolysis with Pulse,2016 International Multi-Conference on Engineering and Technology Innovation (IMETI 2016),2016-10-2016-11,(其他)
105Jhao-Jhong Su, Che-Chia Tsao, Jian-Gui Chang, and Chao-Ming Hsu, The Study of Nano-Structure Surface for 316 Stainless Steel by Plasma Electrolytic Technology,,2016 International Multi-Conference on Engineering and Technology Innovation (IMETI 2016),2016-10-2016-11,(其他)
105Jin-Yue Li, Chao-Ming Hsu, Ah-Der Lin, Jao-Hwa Kuang,Double-Beam Laser Scribing Process for Manufacturing Thin-film Solar Cells,2016 International Conference on Innovation, Communication and Engineering (ICICE 2016),2016-11-2016-11,(其他)
104Jao-Hwa Kuang,Chao-Ming Hsu, Ah-Der Lin,The Coffin-Manson Formula for Unleaded Sn/3.0Ag/0.5Cu Solder,2015 International Conference On Applied System Innovation (ICASI2015),2015-05-2015-05,(其他)
104Wei-Yi Chan, Ah-Der Lin, Chao-Ming Hsu,Laser Soldered Eutectic Die-Bonding Processes in LED Packaging,2015 International Conference on Applied System Innovation (ICASI2015),2015-05-2015-05,(其他)
104Wei-Yi Chan,Chao-Ming Hsu,Extraction of the Engineering Inverse Algorithm for LED Laser Eutectic Die Bonding Process Parameters,2015 International Conference On Applied System Innovation (ICASI2015),2015-05-2015-05,(其他)
104Te-Ching Hsiao,Wei-Chen Hsieh,Chun-Fu Yang,Cheng-Yi Chen,Chao-Ming Hsu,The Design of the Directional Solidification Block in the Directional Solidification System Furnace,2015 International Conference on Innovative Computing, Information and Control (ICICIC 2015),2015-08-2015-08,(其他)
104Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin, Determination of Piezoelectric Parameters from the Measured Natural Frequencies of a Piezoelectric Circular Plate,2015 International Conference on Innovation, Communication and Engineering (ICICE 2015),2015-10-2015-10,(其他)
104陳柏豪、許兆民、劉乙聖、林阿德,塑膠轉位齒輪嚙合之應力與應變分析,第18屆全國機構與機器設計學術研討會,2015-10-2015-10
103Te-Ching Hsiao, Jhao-Jhong Su, Wei-Cheng Hsieh, Cheng-Yi Chen, Chao-Ming Hsu,"Production of Nano Structured Stainless Steel Surface through the Electrolytic Plasma Technology,2014 International Conference on Innovation, Communication and Engineering (ICICE2014),2014-10-2014-10,(其他)
103Te-Ching Hsiao, Jhao-Jhong Su, You-Qing Cao, Ah-Der Lin, Chao-Ming Hsu,Process Control Parameters of Nano Structured Stainless Steel Surface through the Plasma Electrolytic Technology,2014 International Conference on Innovation, Communication and Engineering (ICICE2014),2014-10-2014-10,(其他)
103Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin,Effects of the Bonding Force on the Conductivity of ACF Packaging,2014 International Conference on Innovation, Communication and Engineering (ICICE2014),2014-10-2014-10,(其他)
103陳建樺、林曉青、許兆民、蔡明章,雙軸太陽能追日機構之設計與製作,機械工程學會第三十一屆全國學術研討會論文集,2014-12-2014-12
103康閔傑、謝瑋宸、邱柏融、許兆民,定向長晶爐底部均溫散熱塊之設計,中國機械工程學會第三十一屆全國學術研討會論文集,2014-12-2014-12
103曹尤清、黃大勻、許兆民,脈衝電流應用於鹼性電解法製作片狀鋅粉之研究,中國機械工程學會第三十一屆全國學術研討會論文集,2014-12-2014-12
102,Sn/3.0Ag/0.5Cu Tin Ball Tensile Creep Test,2nd International Conference on Innovation, Communication and Engineering, (ICICE2013),2013-10-2013-11,(其他)
102Xiao-Qing Lin, Jhao-Jhong Su, Chao-Ming Hsu, Ah-Der Lin,,Process Parameters Optimization of Micro Plasma Welding for Small-scaled SUS 304 Pipe,The 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013),2013-12-2013-12,(其他)
102Bo-Rong Qiu, Cheng-Han Lin, Ah-Der Lin, Chao-Ming Hsu,The Fatigue Life Analysis of the VCSEL with Sn/Pb and Sn/Ag/Cu Solder,The 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013),2013-12-2013-12,(其他)
102Da-Yun Huang, Shu-Lan Ke, Chien-Kuei Chang, Chao-Ming Hsu,Expedited Stabilization of Furnace Slag Produced from Basic Oxygen Steelmaking,The 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013),2013-12-2013-12,(其他)
102邱建嘉、陳建樺、楊耀中、林阿德、許兆民,定向凝固系統之矽碇成長模擬分析, 中國機械工程學會第三十屆全國學術研討會論文集,2013-12-2013-12,(其他)
102謝瑋宸、蘇昭忠、林阿德、許兆民,電漿電解技術於不銹鋼表面奈米結構化之製程設計及運用,中國機械工程學會第三十屆全國學術研討會論文集,2013-12-2013-12,(其他)
102曹尤清、蘇昭忠、陳志冠、許兆民,電漿電解技術於不銹鋼表面奈米結構化之參數探討,中國機械工程學會第三十屆全國學術研討會論文集,2013-12-2013-12
101,Power Flow Analysis on the Dual Input Transmission Mechanisms of Small Wind Turbine Systems,The 2012 World Congress on Advances in Civil, Environmental, and Materials Research, (ACEM12),2012-08-2012-08,(其他)
101Jao-Hwa Kuang , Tsung-Pin Hung, Kuen Lai, Chao-Ming Hsu, Ah-Der Lin,The Surface Absorption Coefficient of S304L Stainless Steel by Nd: YAG Micro-Pulse Laser,The 3rd International Conference on Manufacturing Science and Engineering, (ICMSE2012),2012-03-2012-03,(其他)
101Chao-Ming Hsu, Tsung-Pin Hung, Ah-Der Lin, Jao-Hwa Kuang,An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints,The 3rd International Conference on Manufacturing Science and Engineering, (ICMSE2012),2012-09-2012-03,(其他)
101Jao-Hwa Kuang , Tsung-Pin Hung, Chao-Ming Hsu, Ah-Der Lin,Residual Stress and Bead Profile Analysis of Pulsed Nd: YAG Laser Lap Welding,The First International on Engineering and Technology Innovation, (ICETI2012),2012-11-2012-11,(其他)
101Chao-Ming Hsu, Ah-Der Lin, Tsung-Pin Hung, Wen-Chun Chiu, Jao-Hwa Kuang,Shear Toughness Evaluation of Solder Joints for the Reliability Tests, ,International Conference on Information, Communication and Engineering, (ICICE2012),2012-12-2012-12,(其他)
101Chao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien, Tsung-Pin Hung, Jao-Hwa Kuang,Investigation of Young’s Moduli for Human teeth of Different Ages by Nano Indentation Technology,The 2012 International Conference on Agricultural, Food and Biological Engineering, (ICAFBE 2012),2012-05-2012-05,(其他)
100,Active Region Misalignment by Thermal Residual Stress and Optical Coupled Power Loss of VCSEL Modulus for Sn/37Pb and Sn/3.5Ag Solder Joints,2011 International Conference on Opto-Electronics Engineering and Information Science, (ICOEIS 2011),2011-12-2011-12,(其他)
100,Surface Etching Treatment for Stainless Steel by Electro Micro-Arc Plasma Technology,The 2nd International Symposium on Mechanical Science and Technology, (ISMST 2011),2011-12-2011-12,(其他)
100蘇昭忠、林阿德、陳志冠、許兆民,微管微電漿之製程參數優化,100年度銲接年會,2011-11-2011-11,(其他)
100林阿德、楊耀中、許兆民,ACF製程中導電粒子薄膜厚度的影響,第三十五屆力學學會學術研討會論文集,2011-11-2011-11
100T.P. Hung, C.M. Hsu, S.H. Chiou, J.H. Kuang,Enhancement of coupling efficiency of butterfly package laser modules based on Post-Weld-Shift compensation,The First International on Engineering and Technology Innovation,(ICETI 2011),2021-03-2021-03,(其他)
99光灼華、許兆民,Sn/3.0Ag/0.5Cu 錫球拉力與剪力型潛變實驗之研究,第三十四屆力學學會學術研討會論文集,2010-11-2010-11,(其他)
96,Variation of Shear Strength of Lead Free Sn/3.0Ag/0.5Cu Solder Ball Joints,The 9th Electronics Packaging Technology Conference, (EPTC2007),2007-12-2007-12,(其他)
96,Dynamic Behavior of Roller Gear Cam Systems with Different Torque Compensation Mechanics,The 12th IFToMM World Congress,2007-06-2007-06,(其他)
96陳正義、呂國政、許兆民,油壓伺服系統的遠端控制與實現,中國機械工程學會第二十四屆全國學術研討會論文集,2007-11-2007-11,(其他)
94光灼華, 邱文俊, 許兆民,Sn/37Pb 與S/3.0Ag/0.5Cu 錫球推力試驗之破壞分析,第五屆精密製造學術研討會論文集,2005-11-2005-11,(其他)
94吳振樺、許兆民、光灼華,光電封裝VCSEL構件之銲錫疲勞壽命分析,第二十二屆中國機械工程學會學術研討會論文集,2005-11-2005-11,(其他)
93,錫-銀-銅與錫-鉛錫球的推力破壞研究,第二十一屆中國機械工程學會學術研討會論文集,2004-11-2004-11,(其他)
93光灼華, 吳政樺, 許兆民, 陳鉉盛,錫-銀-銅錫球疲勞壽命公式之研究,第二十一屆中國機械工程學會學術研討會論文集,2004-11-2004-11,(其他)
92光灼華, 許兆民,陣列封裝面射型雷射二極體模組殘留應力與位移之分析,第二十七屆力學學會學術研討會論文集,2003-12-2003-12,(其他)
91劉安展, 許兆民, 光灼華,不同錫球形狀或迴銲過程中其殘留應力的變化,第二十六屆力學學會學術研討會論文集,2002-12-2002-12,(其他)
91許兆民, 劉安展, 光灼華,不同銲墊設計對錫球迴銲過程殘留應力的影響,第二十六屆力學學會學術研討會論文集,2002-12-2002-12,(其他)
90光灼華, 許兆民, 蕭勝中, 陳進明,面射型雷射二極體模組之殘留應力與位移分析,第十八屆中國機械工程學會學術研討會新興工程論文集,2001-12-2001-12,(其他)
89光灼華, 陳柏全, 許兆民,光纖套管焊後殘留應力與位移之分析,第十七屆中國機械工程學會學術研討會,2000-12-2000-12,(其他)
Cheng-Zhu Li, Ruei-Han Chen, Jun-Yi Lin, Liang-An Zheng, And Chao-Ming Hsu,A Study on the Effect of Process Parameters on Thin NAND Flash Wafer by Multi - Beam Matrix Laser Cutting,2019 International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2019),2019-05-2019-05,(其他)
學年度計畫名稱參與人計畫期間補助/委託或合作機構
2012SAC305銲錫 Coffin-Manson 疲勞公式之建立許兆民2012-08~2013-07國科會
2011塑膠厚膜回收專用機之開發許兆民2011-11~2012-10國科會,虹京企業股份有限公司
2011Sn/3.0Ag/0.5Cu 錫球拉力與剪力型潛變實驗之研究許兆民2011-08~2012-07國科會
2009風力發電系統之創新穩速傳動機構開發許兆民2009-11~2010-12國科會
2005LED 光源用於車燈之溫度場分析許兆民2005-11~2006-10國科會,律崴科技有限公司
2004有限元素分析教學計劃許兆民2004-10~2004-12南寧工程有限公司
2004高溫老化與熱循環負載對光頻篩濾多工器焊後位移及耦光率之影響許兆民2004-08~2005-07國科會
2003面射型雷射二極體構裝時之殘留應力分佈與銲後位移分析(2/2)許兆民2003-08~2004-07國科會
2003高爾夫球頭模具製作改善與工程分析技術培育許兆民2003-03~2004-02國科會,明安國際企業股份有限公司
2002面射型雷射二極體構裝時之殘留應力分分佈與銲後位移分析許兆民2002-07~2003-08國科會
2001無鉛製程SOJ與CSP焊點壽命評估模擬分析計畫(1/2)許兆民2001-06~2001-12工業技術研究院工材所
學校名稱國別系所學位起迄年月
國立中山大學中華民國機械與機電工程學系博士0000-00~2010-00
服務機關名稱單位職務期間
國立高雄應用科技大學機械工程系助理教授0000-00~0000-00