102 | Kuo-Ming Chang1 and Yen-Yeu Lin,Robust sliding mode control for a roll-to-roll machine,ICINCO 2013-10th Int. Conf. on Informatics in Control, Automation and Robotics,2013-07-2013-07,(其他) |
101 | 駱鴻恩 、張國明、王珉玟、杜哲光,側門齒之有限元素法應力與應變分析,2012 精密機械與製造科技研討會,(其他) |
101 | 黃豐寅、張國明、李旺龍,利用原子力學顯微鏡探針於人工唾液環境下探討 Spectrum 牙科材料表面的刮痕形貌,2012 精密機械與製造科技研討會,(其他) |
101 | Kuo-Ming Chang and Tien-Tsai Kung,Observer-based adaptive sliding mode control for a Pneumatic Servo System,ICINCO 2012-9th Int. Conf. on Informatics in Control, Automation and Robotics,2012-07-2012-07,(其他) |
101 | 陳道星、張國明、廖紫妤、蔡智凱,以不同退火溫度對Ti:GZO透明導電膜的光特性之研究,中國機械工程學會第二十九屆學術研討會,2012-12-2012-12,(其他) |
100 | 龔天財、張國明,基於觀測器之適應順滑模態控制在氣壓伺服系統之,2011 精密機械與製造科技研討會,2011-05-2011-05 |
100 | 康庭嘉、張國明、林仁輝、李旺龍、屈岳陵、黃逸羣,滾珠螺桿之螺帽熱分析實驗,第18屆三軍官校基礎學術研討會,2011-05-2011-05,(其他) |
100 | 陳建源、張國明,應用PVDF 壓電薄膜製作咬力感測器之研究,第18屆三軍官校基礎學術研討會 |
100 | Yu-Ting Kuo and Kuo-Ming Chang,Observer-based adaptive sliding mode control for uncertain systems with dead-zone input,ICINCO 2011-8th Int. Conf. on Informatics in Control, Automation and Robotics,2011-07-2011-07,(其他) |
100 | Yu-Ting Kuo, Sheng-Yuan Chen, Yung-Tien Liu, and Kuo-Ming Chang,Adaptive sliding mode control for a servo motor system,The 20th MAGDA Conference in Pacific Asia,2011-11-2011-11 |
99 | 李浚澤、張國明,基于比例積分觀測器之離散順滑模態控制,2010 智慧型系統工程應用研討會,2010-05-2010-05,(其他) |
99 | 施子賢、張國明,牙齒咬合力之PV D F 壓電薄膜感測器研究,” 2010 智慧型系統工程應用研討會, pp. 1-205~1-210 (2010).,2010 智慧型系統工程應用研討會,(其他) |
99 | 施廷長、張國明,統一混沌系統適應同步控制,中國機械工程學會第二十七屆學術研討會,2010-12-2010-12 |
98 | 饒翔進、張國明、李旺龍,極低間隙潤滑條件下含粗糙度之人字形溝槽微型空氣軸承運轉特性分析,中國機械工程學會第二十六屆學術研討會,2009-11-2009-11 |
98 | 余思緯、康庭嘉、林仁輝、張國明、李旺龍,滾珠螺桿熱源建模,空軍軍官學校2009 航空機械工程學術研討會,2009-10-2009-10,(其他) |
98 | 馮侃雋、張國明,具有背隙與摩擦系統之非線性控,International Conference on Safety & Security Management and Engineering Technology |
98 | 陳聖銘、張國明,咬合機構之建模,,” International Conference on Safety & Security Management and Engineering Technology,(其他) |
98 | K. M. Chang,Model Reference Adaptive Control for A Precision Positioning System,Seventh IEEE International Confrerence on Control and Automation,2009-12-2009-12,(其他) |
97 | Cheng-Li Wang, Kuo-Ming Chang, and Moo-Chin Wang,Morphology and Properties of ZnTiO3 Nanoparticles Prepared by A Hydrothermal Method for Cosmetics Application,The 2nd International Congress on Ceramics,2008-07-2008-08,(其他) |
97 | Kuo-Ming Chang and Yung-Tien Liu,Design of Observer-Based Adaptive Control for Uncertain Nonlinear Systems,The 6th National Conference on Precision Manufacturing,2008-09-2008-09,(其他) |
97 | 王木琴、張國明、劉至曜、洪敏雄,Sn-9Zn-1.5Ag-1Bi無鉛銲錫合金與銅基材浸鍍反應研究,第一屆兩岸三地綠色材料學術研討會,2008-11-2008-10,(其他) |
97 | 郭昱廷、張國明,具有死區非線性輸入系統結合擴張狀態觀測器之適應性滑動模態控制,2008 第二屆海峽兩岸科技與人文教育暨產學合作研討會,2008-12-2008-12,(其他) |
96 | Chih-Hsiang Yang and Kuo-Ming Chang,Adaptive Neural Network Control for Piezoelectric Hysteresis Compensation in A Positioning System,2007-07-2007-07,(其他) |
96 | 李文仁、張國明,參考模型適應性控制於壓電致動定位平台控制,2007年再生能源科技與應用研討會,2007-03-2007-03 |
96 | Kuo-Ming Chang,Design of Adaptive Sliding Mode Controller for Chaos Synchronization,Proceedings of the 15th Mediterranean Conference on Control and Automation,2007-06-2007-06 |
96 | 吳嘉容、張國明,機械軸封的動態分析,2007空軍軍官學校航空太空工程學術研討會,2007-10-2007-10 |
96 | 陳義方、張國明,具飽和輸入系統之參考模型適應控制與高階微分器結合之研究,2007空軍軍官學校航空太空工程學術研討會,2007-10-2007-10,(其他) |
95 | Kuo-Ming Chang,Adaptive Control for Piezoelectric Positioning System,2006-07-2006-07,(其他) |
94 | Chih-Hsiang Yang and Kuo-Ming Chang,Compensation on the Hysteresis of Piezoelectric Actuator Using Adaptive Neural Network Control,The 3nd Conference on Precision Machinery and Manufacturing Technology,2005-05-2005-05 |
94 | Kuo-Ming Chang,Model Reference Adaptive Control for Uncertain Systems with Sector-Like Bounded Nonlinear Inputs,” The 5th International Conference on Control & Automation, Budapest, Hungary,,” The 5th International Conference on Control & Automation,2005-06-2005-06 |
93 | 楊智翔, 張國明,應用神經網路於壓電致動器之適應性控制,第十三屆全國自動化科技研討會,2004-06-2004-06 |
92 | Kuo-Ming Chang,Observer-based adaptive controller design for uncertain systems with nonlinear input,The 14th International Conference,2003-07-2003-07 |
92 | 楊智翔, 張國明,壓電致動器應用類神經網路之系統建模,中國機械工程學會第二十屆學術研討會 |
91 | Kuo-Ming Chang,Adaptive Control for Uncertain Systems with Sector-Like Bounded Nonlinear Inputs,IFAC 15th Triennial World Congress,2002-07-2002-07 |
91 | Kuo-Ming Chang,Model reference adaptive control for uncertain nonlinear systems,Proceedings of the 2nd KUAS Academic Symposium |
90 | Kuo-Ming Chang, Tsan-Hui Hsu, and Wang-Long Li,Discrete-time Sliding Mode Controller Design with Weak-Pseudo-Sliding Condition,Proceedings of the 1st KUAS Academic Symposium,2001-06-2001-06 |
90 | Kuo-Ming Chang,Model reference adaptive control for uncertain systems with time-varying delay,中華民國自動控制研討會 |
90 | 張國明,陳介力,張志明,遞回式類神經網路估測器於膠膜機製程控制之應用,中華民國自動控制研討會 |
90 | Kuo-Ming Chang,Robust model following controller design for uncertain nonlinear input systems,Proceedings of the 18th National Conference |
89 | Kuo-Ming Chang,Reducing the Output Tracking Error on the Adaptive Control with Dead Zone Schemes,” The Sixth International Conference on Automation Technology, May 9-11, Taiwan,The Sixth International Conference on Automation Technology,2000-05-2000-05 |
89 | Kuo-Ming Chang, Chieh-Li Chen, and Tzong-Lin Wu,An SIA Approach for the Real-Time Scheduling of Elevator Group Systems,The Sixth International Conference on Automation Technology,2000-05-2000-05 |
89 | 張國明、翁健評,膠膜機張力控制,第十五屆全國技術及職業教育研討會 |
89 | 張國明, 陳介力, 李旺龍, 范崇愷,延伸式具色派屈網路在電梯動態模擬之研究, 製造科技領域技術論文研討會 |
89 | 李世宏,李旺龍,張國明,黃鴻聖,宋偉國,微機電系統中扭振鏡片之擠壓膜效應探討,第十五屆全國技術及職業教育研討會 |
89 | 陳明達,張國明,李旺龍,謝煜生,孔隙頸軸承的潤滑,第十五屆全國技術及職業教育研討會,2000-04-2000-04 |
89 | Kuo-Ming Chang,Adaptive Control for Uncertain Systems with Nonlinear Inputs,Proceedings of the 17th National Conference he Chinese Society of Mechanical Engineers |
88 | Sheng-Gwo Wang, Kuo-Ming Chang, and Tsan-Hui Hsu,Mixed convection of micropolar fluids in a cavity with isolated heat source,Proceeding of the 23rd National Conference on Theoretical and Applied Mechanics |
81 | K. M. Chang and P. A. Cook,Model reference adaptive control for a class of nonlinear plants,Singapore Int. Conf.,1992-02-1992-02 |